LEVOLOR RIVIERA
& MARK I BLINDS OPTIONS
Levolor Riviera
½" Micro Blinds Control Options
 |
Wand tilter is
standard on all micro blinds and is available in size increments of 10" starting with
the smallest size of 10".
|
|
Lift cord length
will equal the wand length selected.
|
|
To determine the
Lift and Tilter control lengths measure from the point that will be the top of the blind
down to a position that is comfortable for you to reach, usually about chest high. The
lift cords will lengthen, of course, when you raise the blind and then return to the
height selected when you fully lower it.
|
|
Control
positions: tilt left, lift right (standard).
|
|
Tilt right, lift
on the left (optional).
|
|
Both controls
together on right or left (optional) for micro blinds over 14¾" wide.
|
Levolor Riviera Classic
1" Blinds Control Options
|
Wand tilter is
standard on all mini blinds and is available in size increments of 10" starting with
the smallest size of 10".
|
|
Lift cord length
will equal the wand length selected.
|
|
To determine the
Lift and Tilter control lengths measure from the point that will be the top of the blind
down to a position that is comfortable for you to reach, usually about chest high. The
lift cords will lengthen, of course, when you raise the blind and then return to the
height selected when you fully lower it.
|
|
Control
positions: tilt left, lift right (standard).
|
|
Tilt right, lift
on the left (optional).
|
|
Both controls
together on right or left (optional) for mini blinds over 15½" wide.
|
Levolor Riviera Classic & Mark I
1" Blinds LightMaster Option
|
Levolor's LightMaster blocks out the light that other mini
blinds let in. Lift cord holes are positioned in the back of each slat. When the blind is
closed, the overlapping slats completely cover each hole. The result…a darker room
and greater privacy. Available on the 1" Riviera Classic, 1" Levolor Mark I and
1" Cordless Mark I only.
|
Compare
the Difference
LightMaster Route Hole
|
Ordinary Route Hole
|
|
The LightMaster option is available at an additional
charge on the 1" Levolor Riviera Classic, 1" Levolor Mark I and 1" Cordless
Mark I blinds.
|
Levolor Riviera
Classic & Mark I 1" Blinds Tiltone Option
Levolor Tiltone blinds allow you to bring many of the colors to the
interior of your room while providing a uniform, neutral appearance to the exterior or
your home.
Some colors in the Levolor
Riviera Classic
1", the Levolor
Mark I 1" and the Levolor
Mark I 1-3/8" blinds are available in
"Tiltone", which is a neutral
white on one side of the slat and the selected color on the other. The neutral white is
usually the bottom or "concave"
side of the slat. But you can have the neutral white on the top "convex" side of the slat. It all depends on
which way you intend to close the blinds and which side of the slat you interpret as the
exterior side.
Additionally, the headrail and bottom rail and valance can
each match the color of the slat or the neutral white, again depending on how you intend
to use the blinds.
And the lift cords can match the color of the slat or the
neutral white, again depending on how you intend to use the blinds.
And, finally, the support ladders that hold the slats up
can be neutral white on one side and match the slat color on the other side. Again
depending on how you intend to use the blinds.
The Tiltone option does not add any
additional cost to the blinds.
Levolor
Riviera Classic & Mark I 1" Blinds SheerView Option
|
Levolor’s
unique SheerView feature offers a
revolutionary advancement in horizontal blind window treatments, optimizing the exterior
view while maximizing light and glare control. SheerView provides the ability to see
through a closed blind and delivers up to a 42% reduction in solar heat gain as compared
to a fully opened blind.
|
|
Available with
the premier Mark I DustGuard 1" and best-selling Riviera
Classic DustGuard 1" blinds, SheerView provides a clean, aesthetic look with
.020" diameter symmetric perforations for a 6% openness factor. SheerView is not
available when the blinds are ordered with the LightMaster
option.
|
Levolor Riviera Contract 1" Blinds Control
Options
|
Wand tilter is
standard on all mini blinds and is available in size increments of 10" starting with
the smallest size of 10".
|
|
Lift cord length
will equal the wand length selected.
|
|
To determine the
Lift and Tilter control lengths measure from the point that will be the top of the blind
down to a position that is comfortable for you to reach, usually about chest high. The
lift cords will lengthen, of course, when you raise the blind and then return to the
height selected when you fully lower it.
|
|
Control
positions: tilt left, lift right (standard).
|
|
Tilt right, lift
on the left (optional).
|
|
Both controls
together on right or left (optional) for mini blinds over 15½" wide.
|
Levolor Riviera
2" Maxi Blinds Control
Options
|
Wand tilter is
standard on all maxi blinds and is available in size increments of 10" starting with
the smallest size of 10". As an option you can specify cord tilters on Levolor
2" Riviera maxi blinds at no additional cost.
|
|
Lift cord length
will equal the wand length selected.
|
|
To determine the
Lift and Tilter control lengths measure from the point that will be the top of the blind
down to a position that is comfortable for you to reach, usually about chest high. The
lift cords will lengthen, of course, when you raise the blind and then return to the
height selected when you fully lower it.
|
|
Control
positions: tilt left, lift right (standard).
|
|
Tilt right, lift
on the left (optional).
|
|
Both controls
together on right or left (optional) for macro blinds over 18½" wide.
|
Levolor Riviera
2" Maxi Blinds Tape
Support Options
Cotton twill tapes are an optional additional charge on
Levolor 2" Riviera maxi blinds in place of the standard slat ladders. They are
available in 1½" width.
Levolor Mark I 1" Blinds Control
Options
|
Wand tilter is
standard on all mini blinds and is available in size increments of 10" starting with
the smallest size of 10".
|
|
Lift cord length
will equal the wand length selected.
|
|
To determine the
Lift and Tilter control lengths measure from the point that will be the top of the blind
down to a position that is comfortable for you to reach, usually about chest high. The
lift cords will lengthen, of course, when you raise the blind and then return to the
height selected when you fully lower it.
|
|
Control
positions: tilt left, lift right (standard).
|
|
Tilt right, lift
on the left (optional).
|
|
Both controls
together on right or left (optional) for Mark I blinds over 15-7/8" wide.
|
Levolor Mark I
SmartControl Cordless 1" Blinds Control Options
|
Wand tilter is
standard on all mini blinds and is available in size increments of 10" starting with
the smallest size of 10".
|
|
To determine the
Tilter control lengths measure from the point that will be the top of the blind down to a
position that is comfortable for you to reach, usually about chest high.
|
|
No lift cord on
Mark I Cordless. A simple touch is all it takes to raise and lower the blind.
|
|
Be sure you will be able to reach the bottom of the blind when it is in the
raised position so you can raise and lower it.
|
|
Control
positions: tilt left (standard), tilt right.
|
Levolor Mark I Grande 1-3/8" Blinds Control
Options
|
Wand tilter is
standard on all mini blinds and is available in size increments of 10" starting with
the smallest size of 10".
|
|
Lift cord length
will equal the wand length selected.
|
|
To determine the
Lift and Tilter control lengths measure from the point that will be the top of the blind
down to a position that is comfortable for you to reach, usually about chest high. The
lift cords will lengthen, of course, when you raise the blind and then return to the
height selected when you fully lower it.
|
|
Control
positions: tilt left, lift right (standard).
|
|
Tilt right, lift
on the left (optional).
|
|
Both controls
together on right or left (optional) for Mark I blinds over 15-7/8" wide.
|
Levolor Mark I
Grande 1-3/8" SmartControl Cordless
Blinds Control Options
|
Wand tilter is
standard on all mini blinds and is available in size increments of 10" starting with
the smallest size of 10".
|
|
To determine the
Tilter control lengths measure from the point that will be the top of the blind down to a
position that is comfortable for you to reach, usually about chest high.
|
|
No lift cord on
Mark I Cordless. A simple touch is all it takes to raise and lower the blind.
|
|
Be sure you will be able to reach the bottom of the blind when it is in the
raised position so you can raise and lower it.
|
|
Control
positions: tilt left (standard), tilt right.
|
To learn more about The Blind Alley visit
our Company Profile.
|
